[c-nsp] ATM multipoint on a c7600 SPA/SIP-200

[MKS]

Hello list

I have a c7600/RSP-720 with a SIP-200 and ATM 2xOC3 SPA running SRB1.

I seams that i'm unable to create a ATM multipoint subinterface when the
sub-int number is greater than 100.

test-pe-1(config-subif)#int atm9/1/1.2 multipoint
test-pe-1(config-subif)#int atm9/1/1.50 multipoint
test-pe-1(config-subif)#int atm9/1/1.90 multipoint
test-pe-1(config-subif)#int atm9/1/1.100 multipoint
% Warning:  cannot change link type

test-pe-1(config-subif)#do sh run int atm9/1/1.2
Building configuration...

Current configuration : 64 bytes
!
interface ATM9/1/1.2 multipoint
 no atm enable-ilmi-trap
end

test-pe-1(config-subif)#do sh run int atm9/1/1.100
Building configuration...

Current configuration : 70 bytes
!
interface ATM9/1/1.100 point-to-point
 no atm enable-ilmi-trap
end

Is it a bug or what ?

I just got "Error occurred while fetching bug summary from database. Please
try later." while trying to search the bug database.

Regards MKS