[c-nsp] single interface multiple VRF

[Ray Burkholder]

This may help some:
http://www.oneunified.net/blog/Cisco/vrflite.article 

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of 
> Masood Ahmad Shah
> Sent: Thursday, October 04, 2007 19:01
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] single interface multiple VRF
> 
> 
> Is it Possible to have 2 or more VRF tables existing on one 
> single Interface Eth/Serial. If the answer is yes, how do you 
> guys do that. 
> 
> Regards,
> Masood Ahmad Shah
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> --
> Scanned for viruses and dangerous content at 
> http://www.oneunified.net and is believed to be clean.
> 
> 


-- 
Scanned for viruses and dangerous content at 
http://www.oneunified.net and is believed to be clean.