[c-nsp] Changing vlan numbers

[Jeff Crowe]

Hi all,

I have a catalyst 5500 with a trunk port setup doing dot1q and 3 vlans
coming into that port (eg: 3,95,199). I need to take one of those vlans that
comes in (199) and change it to be vlan 48. Vlan 48 exists on the switch
already.

Is there a way to re-write the vlan information so I can change vlan 199 in
this example to vlan 48 without having to create two access ports and put a
cross over between them?

Thanks,

Jeff