[c-nsp] Per-interface PPS oid for 29xx?

[Eric]

Hi Andrew,

I'm using ifInUcastPkts (1.3.6.1.2.1.2.2.1.11) and ifOutUcastPkts 
(1.3.6.1.2.1.2.2.1.17) on my 29xx's with MRTG.  That grabs unicast
packets.

I also grab these iods:

ifInNUcastPkts (1.3.6.1.2.1.2.2.1.12)  // "Not" Unicast packets,
ifOutNUcastPkts (1.3.6.1.2.1.2.2.1.18) // aka, Multicast and Broadcast packets

Technically, you should probably add these values together to get total 
packets into the interface.

I hope that helps you.

- Eric Einhorn




andrew2 at one.net wrote:
> Feeling just a little stupid here.  I'm wanting to gather the 5min. Average
> packets-per-second data from individual interfaces on 29xx switches via
> SNMP.  The data is available via "sh int" but I can't for the life of me
> seem to find a corresponding oid.  Maybe I'm reading the MIBs wrong, but I
> just don't see it.  Is that data just not published out in SNMP or am I
> overlooking the obvious?
> 
> Thanks,
> 
> Andrew
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/