[c-nsp] Error loading IOS onto Cisco2821

[Jason Travis]

If you freed up space by using 'delete flash:filename', then you will have
to enter 'squeeze flash:' to actually free up the space
Or you can just do 'erase flash:' to erase the entire flash.

On 10/18/07, Adrian Chadd <adrian at creative.net.au> wrote:
>
> Did you delete the file or erase the flash first?
>
> Obviously a "show flash" would've been a great thing to do
> when emailing this out as the default 2800 CF cards ship with
> other gunk on them as well.
>
>
>
> Adrian
>
>
> adrian
>
> On Thu, Oct 18, 2007, omar parihuana wrote:
> > Hi lists,
> >
> > I'm trying load the c2800nm-advipservicesk9-mz.124-15.T1.bin image into
> > Cisco2821, in accordance to Cisco WebPage the RAM and Flash required
> are:
> > 256/64, my chassis has:
> >
> > Cisco 2821 (revision 53.51) with 249856K/12288K bytes of memory.
> > Processor board ID FTX1115A1MX
> > 2 Gigabit Ethernet interfaces
> > 2 Serial(sync/async) interfaces
> > DRAM configuration is 64 bits wide with parity enabled.
> > 239K bytes of non-volatile configuration memory.
> > 62720K bytes of ATA CompactFlash (Read/Write)
> >
> > and c2800nm-advipservicesk9-mz.124-15.T1.bin is almost 50MB, but when I
> > loaded the image I have an error:
> >
> > GigabitEthernet0/0):
> >
> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> > %Error copying flash:c2800nm-advipservicesk9-mz.124-15.T1.bin (No space
> left
> > on device)
> > Why appear this error if I have enough space in my device? any
> suggestion
> > will be appreciated
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>