[c-nsp] Error loading IOS onto Cisco2821

[Adrian Chadd]

Did you delete the file or erase the flash first?

Obviously a "show flash" would've been a great thing to do
when emailing this out as the default 2800 CF cards ship with
other gunk on them as well.



Adrian


adrian

On Thu, Oct 18, 2007, omar parihuana wrote:
> Hi lists,
> 
> I'm trying load the c2800nm-advipservicesk9-mz.124-15.T1.bin image into
> Cisco2821, in accordance to Cisco WebPage the RAM and Flash required are:
> 256/64, my chassis has:
> 
> Cisco 2821 (revision 53.51) with 249856K/12288K bytes of memory.
> Processor board ID FTX1115A1MX
> 2 Gigabit Ethernet interfaces
> 2 Serial(sync/async) interfaces
> DRAM configuration is 64 bits wide with parity enabled.
> 239K bytes of non-volatile configuration memory.
> 62720K bytes of ATA CompactFlash (Read/Write)
> 
> and c2800nm-advipservicesk9-mz.124-15.T1.bin is almost 50MB, but when I
> loaded the image I have an error:
> 
> GigabitEthernet0/0):
> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
> %Error copying flash:c2800nm-advipservicesk9-mz.124-15.T1.bin (No space left
> on device)
> Why appear this error if I have enough space in my device? any suggestion
> will be appreciated