[c-nsp] Error loading IOS onto Cisco2821

[Pham, Loc]

  What is your dir/show flash output ?

Regards,
Loc Pham, # 17030 R/S
"We switch our network dedicately :One packet at a time... "
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of omar parihuana
Sent: Thursday, October 18, 2007 3:37 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Error loading IOS onto Cisco2821

Hi lists,

I'm trying load the c2800nm-advipservicesk9-mz.124-15.T1.bin image into
Cisco2821, in accordance to Cisco WebPage the RAM and Flash required
are:
256/64, my chassis has:

Cisco 2821 (revision 53.51) with 249856K/12288K bytes of memory.
Processor board ID FTX1115A1MX
2 Gigabit Ethernet interfaces
2 Serial(sync/async) interfaces
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)

and c2800nm-advipservicesk9-mz.124-15.T1.bin is almost 50MB, but when I
loaded the image I have an error:

GigabitEthernet0/0):
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
%Error copying flash:c2800nm-advipservicesk9-mz.124-15.T1.bin (No space
left
on device)
Why appear this error if I have enough space in my device? any
suggestion
will be appreciated


Rgds.

-- 
Omar E.P.T
-----------------
Certified Networking Professionals make better Connections!
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/