[c-nsp] BFD support in 12.2(33)SXH on ME6524

Rubens Kuhl Jr. rubensk at gmail.com
Fri Oct 19 13:54:27 EDT 2007


Does this happen with both modular and non-modular SXH images ?
Not capable of running BFD on SVIs after having issues with BFD on ZU2
makes me a very unhappy customer.


Rubens



On 10/18/07, Justin Shore <justin at justinshore.com> wrote:
> During a recent upgrade from the ZU2 code to SXH on one of our 6524s I
> ran into BFD trouble.  In ZU2 we had BFD configured on a pair of SVIs
> and it worked great.  Apparently in SXH BFD is only supported on
> physical interfaces.
>
> TAC told me some time back that ZU2 was a special SX release to support
> the ME6524s.  Does anyone know why the feature regression occured or
> even better if this will be fixed in a later release?  L3 interfaces
> aren't possible in our setup without some serious reworking.
>
> Thanks
>   Justin
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


More information about the cisco-nsp mailing list