[c-nsp] 6503-E with Sup720-3BXL?

[Tim Stevenson]

This particular verbiage refers only to the 6, 9, & 13 slot systems.

Tim

At 10:14 PM 10/23/2007 -0500, mack observed:
>I have seen several compatibility notes that state that the Sup720 
>requires a 2500W PS.
>However, It is also listed as compatible with the 6503-E.
>Can the Sup720-3BXL be used in a 6503-E with the 1400W PS?
>Or does it require combined mode 1400W PSes?
>Or does this limitation only apply to 6,9 and 13 slot chassis.
>
>Obviously the power draw can be handled by the 1400W PS.
>The real question is does IOS limit this particular combination?
>
>LR Mack McBride
>Network Administrator
>Alpha Red, Inc.
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/



Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Technical Marketing Engineer, Data Center BU
Cisco Systems, http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.