[c-nsp] Has anyone run into this error: %SYS-4-CHUNKMALLOCFAIL

[Howard Leadmon]

It's running 12.4(15)T1, as posted in my initial write up.  I could be wrong,
but I think with the NPE-G2, I have to use the T train for support of that
NPE.  I checked CCO to see I there was any newer version, but I don't see
anything.

Two others were nice enough to send me this link:

http://puck.nether.net/pipermail/cisco-nsp/2007-September/043458.html



>From the looks of it, nothing I need to worry about.  Granted in that article
they are talking about the G1 (not the G2), and 12.4 (not 12.4T).  Hopefully
it's just a non-issue, and will be addressed in the next version of 12.4T. I
know I haven't seen any other issues, outside of this showing up in the
logs...

 

---
Howard Leadmon 


> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Seth Mattinen
> Sent: Wednesday, October 24, 2007 12:06 PM
> To: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] Has anyone run into this error: %SYS-4-CHUNKMALLOCFAIL
> 
> Howard Leadmon wrote:
> > The sucker should have more RAM than it knows what to do with..   *smiles*
> >
> >> sho proc mem
> > Processor Pool Total: 1898778796 Used:  240963296 Free: 1657815500
> >       I/O Pool Total:   67108864 Used:    5887264 Free:   61221600
> > Transient Pool Total:   16777216 Used:      18372 Free:   16758844
> >
> > Unless there is some allocation for CEF that needs to be set..
> >
> 
> What IOS are you running? Any T versions? I've never heard of that error
> unless it's actually run out of memory, memory is too fragmented, or
> there's a bug.
> 
> ~Seth
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/