[c-nsp] Where do you put the optical attenuators?
dale.shaw+cisco-nsp at gmail.com
Fri Oct 26 16:42:01 EDT 2007
On 10/27/07, John Souvestre <johns at sstar.com> wrote:
> I would think that putting them on the receiver side would be best. This way
> they will attenuate the noise along with the signal.
I agree. Cisco's documentation for their SC and LC attenuators (not
that they're special in any way) instruct the installer to place the
attenuator on the RX side.
More information about the cisco-nsp