[c-nsp] Extracting serial numbers from Show techs

[Arnold Nipper]

On 06.09.2007 18:52 William F. Maton Sotomayor wrote

> On Thu, 6 Sep 2007, laurent.pernot at bnpparibas.com wrote:
> 
>> I use this for a Catalyst 6509 & little switch.
>>
>> OID Chassis serial number  : .1.3.6.1.2.1.47.1.1.1.1.11.1
>> OID Cards serial number and type : .1.3.6.1.4.1.9.5.1.3.1.1
> 
> It's a good point.  I have come across some scripts that will take the 
> output of "show inventory" as well, but I'm not sure what IOS versions and 
> platforms support that command.
> 

Everfything >= 12.3(4)T should support this command.


Arnold
-- 
Arnold Nipper / nIPper consulting, Sandhausen, Germany
email: arnold at nipper.de       phone: +49 6224 9259 299
mobile: +49 172 2650958         fax: +49 6224 9259 333