[c-nsp] Extracting serial numbers from Show techs

[Kevin Graham]

Has anyone ever gotten a 7200 chassis S/N as reported by 'sh inv' to match
up with rear label?

----- Original Message ----
From: Arnold Nipper <arnold at nipper.de>
To: wmaton at ryouko.imsb.nrc.ca; cisco-nsp at puck.nether.net
Sent: Thursday, September 6, 2007 1:10:47 PM
Subject: Re: [c-nsp] Extracting serial numbers from Show techs

On 06.09.2007 18:52 William F. Maton Sotomayor wrote

> On Thu, 6 Sep 2007, laurent.pernot at bnpparibas.com wrote:
> 
>> I use this for a Catalyst 6509 & little switch.
>>
>> OID Chassis serial number  : .1.3.6.1.2.1.47.1.1.1.1.11.1
>> OID Cards serial number and type : .1.3.6.1.4.1.9.5.1.3.1.1
> 
> It's a good point.  I have come across some scripts that will take the 
> output of "show inventory" as well, but I'm not sure what IOS versions and 
> platforms support that command.
> 

Everfything >= 12.3(4)T should support this command.


Arnold
-- 
Arnold Nipper / nIPper consulting, Sandhausen, Germany
email: arnold at nipper.de       phone: +49 6224 9259 299
mobile: +49 172 2650958         fax: +49 6224 9259 333
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/