[c-nsp] Extracting serial numbers from Show techs

[William F. Maton Sotomayor]

On Thu, 6 Sep 2007, Kevin Graham wrote:

> Has anyone ever gotten a 7200 chassis S/N as reported by 'sh inv' to match
> up with rear label?

I've not looked too deeply into it, but I haven't with any of the ones we 
have.

>
> ----- Original Message ----
> From: Arnold Nipper <arnold at nipper.de>
> To: wmaton at ryouko.imsb.nrc.ca; cisco-nsp at puck.nether.net
> Sent: Thursday, September 6, 2007 1:10:47 PM
> Subject: Re: [c-nsp] Extracting serial numbers from Show techs
>
> On 06.09.2007 18:52 William F. Maton Sotomayor wrote
>
>> On Thu, 6 Sep 2007, laurent.pernot at bnpparibas.com wrote:
>>
>>> I use this for a Catalyst 6509 & little switch.
>>>
>>> OID Chassis serial number  : .1.3.6.1.2.1.47.1.1.1.1.11.1
>>> OID Cards serial number and type : .1.3.6.1.4.1.9.5.1.3.1.1
>>
>> It's a good point.  I have come across some scripts that will take the
>> output of "show inventory" as well, but I'm not sure what IOS versions and
>> platforms support that command.
>>
>
> Everfything >= 12.3(4)T should support this command.
>
>
> Arnold
> -- 
> Arnold Nipper / nIPper consulting, Sandhausen, Germany
> email: arnold at nipper.de       phone: +49 6224 9259 299
> mobile: +49 172 2650958         fax: +49 6224 9259 333
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


wfms