[c-nsp] hardware load balancer?

Arie Vayner (avayner) avayner at cisco.com
Thu Sep 13 10:18:04 EDT 2007


Guys,

One thing I did not see in the thread are the HW load balancers you can
install inside the 6500.
You could use either the somewhat older CSM or the newer ACE modules:
http://www.cisco.com/en/US/products/hw/modules/ps2706/ps780/index.html
http://www.cisco.com/en/US/products/ps6906/index.html

Arie 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Adrian Chadd
Sent: Thursday, September 13, 2007 17:07 PM
To: Adam Greene
Cc: Cisco-nsp
Subject: Re: [c-nsp] hardware load balancer?

On Thu, Sep 13, 2007, Adam Greene wrote:

> F5 was mentioned most frequently in a positive way IOS SLB on 
> 7200/6500 and Foundry were also mentioned positively and frequently

Depending on the 6500 hardware you're using you might find SLB to be
slightly temperamental.

I'm not sure whether it was just our local Cisco rep trying to have us
bust out the cheque book or not, but the feedback we got was "IOS SLB on
Supervisor 2 is a miracle and not really intended for use." I'm not sure
if any of my coworkers ever filed TAC bugs when the 6500 would "forget"
things and require a reboot.




Adrian

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list