[c-nsp] Routing problem with Cisco 1841

[Collins, Richard (SNL US)]

Looking at your IP addressing, I would say that you have to do your
natting
on the outside address of the ASA 5510 or "Main router" and not on the
1841.

Rich

>From: "Wycliffe Bahati" <bahati at 6telecoms.co.tz>
>Subject: Re: [c-nsp] Routing problem with Cisco 1841
>To: <cisco-nsp at puck.nether.net>
>Message-ID: <200709190951.l8J9pXrg032019 at un3310030049.unon.org>
>Content-Type: text/plain;      charset="windows-1250"
>
>The info you have provided is not sufficient for one to id the problem.
For
>one your nat is not done properly. But not sure if that?s your problem.
>
>Wycliffe
>
>-----Original Message-----
>From: cisco-nsp-bounces at puck.nether.net
>[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Krishna Kishore
>Sent: Tuesday, September 18, 2007 3:14 PM
>To: cisco-nsp at puck.nether.net
>Subject: [c-nsp] Routing problem with Cisco 1841
>
>Hi All,
>
>I have a small problem in routing with asa and cisco 1841. The scenario
is
>as follows,
>
> PC (192.168.100.2) -----> (192.168.100.1) Cisco 1841 (192.168.0.222)
>------> L2 Switch -------> (192.168.0.1) ASA 5510  ------> Main Router
>--------> Internet
>
>Above the pc can not able to browse the internet. I have pasted the
configs
>of the router please check and suggest me where I'm mistaken.
>
>Cis1841#sh run
>Building configuration...
>
>Current configuration : 1099 bytes
>!
>version 12.4
>service timestamps debug datetime msec
>service timestamps log datetime msec
>service password-encryption
>!
>hostname Cis1841
>!
>boot-start-marker
>