[c-nsp] PIX 515E PPTP VPN Routing?

[christian]

post your vpn config

what code are you using?



On 9/22/07, Lyndon Tiu <ltiu at alumni.sfu.ca> wrote:
>
> Hi guys,
>
> I have a PIX 515E.
>
> I setup the PIX as a PPTP VPN server accepting PPTP connections from the
> outside. I have a Windows XP client on the outside connecting to the
> internal network using the PIX as the PPTP server.
>
> I followed instructions setting up the VPN and the Windows client is
> able to connect to the PIX and obtain an ip from the ip pool.
>
> Problem is, the Windows client is unable to do anything after this. It
> cannot ping any other machines on the network.
>
> I believe this is a routing issue. Can someone on this list confirm if
> routing is something I have to do separate from the VPN configuration?
>
> Ipconfig says that a default gateway is not assigned to the Windows
> client by the PIX through the PPTP VPN. Route /print shows no routes
> added by the PPTP. I do not see any PPTP VPN configuration that allows
> me to setup routes.
>
>
> --
> Lyndon Tiu
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>