[c-nsp] 3550 as a BGP Router

[sthaug at nethelp.no]

> > So, if You stay within platform limits (SDM template),
> > everything should run in hardware.
> 
> In our case, we'd be holding a handful of NLRI just for 
> management (v4 and v6 loopback IP addresses [OSPFv2|3]) in 
> the switches. No BGP.
> 
> Would not be significant enough to justify a default 
> (balanced) SDM template, as more resources would be 
> required for Layer 2.

Note that if you configure "sdm prefer vlan", you *cannot* configure
IP routing at all - the commands won't be accepted.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no