[c-nsp] 12.2(33)SRB, ip tacacs command on 7604

[Bogdan Radulescu]

Hello List,

Just upgraded one DR 3560 to 7604, and when i tried to apply my standard
tacacs config, got this error:

DRxx-7604.xxxxx.xxx(config)#ip tacacs source-interface loop0
                                ^
% Invalid input detected at '^' marker.

DRxx-7604.xxxxx.xxx#sh ver | i Version
Cisco IOS Software, c7600s3223_rp Software
(c7600s3223_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRB, RELEASE SOFTWARE
(fc6)
ROM: System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)


I tried also:

aaa group server tacacs+ tacmethod
 server-private x.x.x key 7 yyyyyy
 ip tacacs source-interface Loopback0

but no luck, i can't get a login prompt.

I have another 7604, but with ver: Version 12.2(18)SXF6, and the same
config is working just fine.


Any ideea?

Thanks.
Bogdan