[c-nsp] Cisco 2851 with HWIC-4ESW and CBR configuration.

[Brad Henshaw]

ana.m.henriques at sapo.pt wrote:

> I try to configure CBR for the interface GIgabit and the 
> fa0/1/0 (HWIC-4ESW interface) and it return an error.

I suspect you'll need to bridge on an SVI instead - try adding Fa1/0/1
to a VLAN, and bridge on the VLAN interface. HWIC-4ESW ports are plain
layer 2 switchports and don't support the functionality of a routed
port. (but most of this can be achieved through SVIs)

Regards,
Brad