[c-nsp] SNMP OID for reading Sup32 SP CPU in native IOS

Dale W. Carder dwcarder at doit.wisc.edu
Fri Sep 28 15:01:34 EDT 2007


How to Collect CPU Utilization on Cisco IOS Devices Using SNMP
Procedure for Devices with Multiple CPUs

http://www.cisco.com/en/US/tech/tk648/tk362/ 
technologies_tech_note09186a0080094a94.shtml#multiple

Dale


On Sep 28, 2007, at 1:41 PM, Everton da Silva Marques wrote:

> Hi,
>
> May anyone please point me the SNMP OID for reading
> the load at the Sup32 Switch Processor CPU?
>
> IOS is native IPSERVICES 12.2(18)SXF10.
>
> I'm searching the OID with the same values as the
> following command:
>
>   7604#remote command switch show proc cpu
>
>   CPU utilization for five seconds: 14%/6%; one minute: 21%; five  
> minutes: 21%
>
> The following OID is not producing result:
>
>   1.3.6.1.4.1.9.12.3.1.9.5.111
>   CISCO-ENTITY-VENDORTYPE-OID-MIB::cevCpuCat6kWsSup32ge
>
> Since snmpwalk replied with:
>
>   "No Such Object available on this agent at this OID".
>
> Please advise.
>
> Many thanks,
> Everton


More information about the cisco-nsp mailing list