[c-nsp] NPE-G1 support for jumbo frames

[Jose]

Gerald Krause wrote:
> Jose schrieb:
>   
>> We have not been able to change the MTU for the PA-FE-TXs to anything 
>> larger than the standard 1500.  Every time you try and change it, it 
>> spits back an error about not being allowed on this interface.  This is 
>> with the 7206VXR NPE300 running 12.2(15)T.
>>     
>
> We're running up to 1530 on a PA-FE-TX (NPE300/7206VXR with 
> 12.2(31)SB) because of MPLS:
>
> Slot 4:
>          Fast-ethernet (TX-ISL) Port adapter, 1 port
>          Port adapter is analyzed
>          Port adapter insertion time 28w3d ago
>          EEPROM contents at hardware discovery:
>          Hardware revision 1.0           Board revision A0
>          Serial number     3579616       Part number    73-1688-03
>          FRU Part Number:  PA-FE-TX
>
> !
> interface FastEthernet4/0
>   ...
>   mtu 1530
>   ...
> !
>
> --
> Gerald   (ax/tc)
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
> __________ NOD32 2991 (20080401) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.eset.com
>
>
>
>   
Awesome!  Thanks Gerald.  I'll try this code on our lab router and see 
if it makes the difference.  Hopefully I'll still get a chance to 
upgrade the NPEs to G1s but at least this could let us deploy EoMPLS 
without having to wait for hardware shipments.

Jose