[c-nsp] NPE-G1 support for jumbo frames

[Rodney Dunn]

Can someone send me the output when they try to set it?

It will save me time from having to set it up in the lab.

Rodney

On Wed, Apr 02, 2008 at 12:13:08PM -0700, Lasher, Donn wrote:
> -----Original Message-----
> From: Adam Armstrong [mailto:lists at memetic.org] 
> Subject: Re: [c-nsp] NPE-G1 support for jumbo frames
> 
> >Are you sure this affects the NPE-G1 ?
> 
> No, we only tested the NPE-G2's.
> 
> >I've never personally tested on an NPE-G2, but this NPE-G1 is fine:
> 
> That's outstanding news. It seemed completely boneheaded to me, and it's
> nice to see it apparently restricted to a single Engine rev.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/