[c-nsp] NPE-G1 support for jumbo frames

[Hendry Sarumpaet]

How about PA-2FE-TX does anybody have a chance to test ?
Maybe we need to test it with 12.2(3X)SBX also :)
PA-2FE-TX with NPE-G2/7206VXR run 12.4.4-XD9

on slot 5

5/1
foo#mtu ?
  <64-17940>  MTU size in bytes
foo#mtu 1570
% Interface FastEthernet5/0 does not support user settable mtu.


--
hsa





Tuesday, April 1, 2008, 7:34:53 PM, you wrote:

> Jose schrieb:
>> We have not been able to change the MTU for the PA-FE-TXs to anything 
>> larger than the standard 1500.  Every time you try and change it, it 
>> spits back an error about not being allowed on this interface.  This is 
>> with the 7206VXR NPE300 running 12.2(15)T.

> We're running up to 1530 on a PA-FE-TX (NPE300/7206VXR with 
> 12.2(31)SB) because of MPLS:

> Slot 4:
>          Fast-ethernet (TX-ISL) Port adapter, 1 port
>          Port adapter is analyzed
>          Port adapter insertion time 28w3d ago
>          EEPROM contents at hardware discovery:
>          Hardware revision 1.0           Board revision A0
>          Serial number     3579616       Part number    73-1688-03
>          FRU Part Number:  PA-FE-TX

> !
> interface FastEthernet4/0
>   ...
>   mtu 1530
>   ...
> !

> --
> Gerald   (ax/tc)
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


-- 
Best regards,