[c-nsp] Cisco 2811 and WIC-1DSU-T1.

[virendra rode //]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Justin Shore wrote:
> I should have thought of that.  :-(
> 
> http://www.cisco.com/en/US/prod/collateral/routers/ps5854/prod_qas0900aecd80169bd6.html
> 
> 
> Justin
- ---------------------------
Bummer because I thought I read somewhere that someone was able to force
WIC-1DSU-T1 to function with 2811 under 124-11.XJ.bin. Maybe I misread.
I'm sure I don't have a counterfeit WIC.


        WIC Slot 0:
        FT1 BT8360
        WIC module not supported/disabled in this slot
        Hardware revision 1.3           Board revision E0
        Serial number     28963342      Part number    800-03279-04
        FRU Part Number     WIC-1DSU-T1=
        Test history      0x0           RMA number     00-00-00
        Connector type    Wan Module
        EEPROM format version 2
        EEPROM contents (hex):
          0x20: 02 11 01 03 01 B9 F2 0E 50 0C CF 04 00 00 00 00
          0x30: 70 00 00 00 02 08 25 01 FF FF FF FF FF FF FF FF


regards,
/virendra

> 
> Ben Mason wrote:
>> The WIC-1DSU-T1 is not supported in a 2811 you need to use a
>> WIC-1DSU-T1-V2
> 
> 
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFH9VQhpbZvCIJx1bcRAswlAJ9spygoboHg9gOY0QgT53M4yyx+IwCeIpKf
0I7zZFex8Unv10brhH9qaHQ=
=BMcN
-----END PGP SIGNATURE-----