[c-nsp] Cisco 2811 and WIC-1DSU-T1.

[Justin Shore]

Yeah, and I was thinking I had a v1 working in an ISR too but I can't 
find one.  V2s are better anyway.

Justin

virendra rode // wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> Justin Shore wrote:
>> I should have thought of that.  :-(
>>
>> http://www.cisco.com/en/US/prod/collateral/routers/ps5854/prod_qas0900aecd80169bd6.html
>>
>>
>> Justin
> - ---------------------------
> Bummer because I thought I read somewhere that someone was able to force
> WIC-1DSU-T1 to function with 2811 under 124-11.XJ.bin. Maybe I misread.
> I'm sure I don't have a counterfeit WIC.
> 
> 
>         WIC Slot 0:
>         FT1 BT8360
>         WIC module not supported/disabled in this slot
>         Hardware revision 1.3           Board revision E0
>         Serial number     28963342      Part number    800-03279-04
>         FRU Part Number     WIC-1DSU-T1=
>         Test history      0x0           RMA number     00-00-00
>         Connector type    Wan Module
>         EEPROM format version 2
>         EEPROM contents (hex):
>           0x20: 02 11 01 03 01 B9 F2 0E 50 0C CF 04 00 00 00 00
>           0x30: 70 00 00 00 02 08 25 01 FF FF FF FF FF FF FF FF
> 
> 
> regards,
> /virendra
> 
>> Ben Mason wrote:
>>> The WIC-1DSU-T1 is not supported in a 2811 you need to use a
>>> WIC-1DSU-T1-V2
>>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.2.2 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
> 
> iD8DBQFH9VQhpbZvCIJx1bcRAswlAJ9spygoboHg9gOY0QgT53M4yyx+IwCeIpKf
> 0I7zZFex8Unv10brhH9qaHQ=
> =BMcN
> -----END PGP SIGNATURE-----