[c-nsp] Cisco 2811 and WIC-1DSU-T1.

joe mcguckin joe at via.net
Thu Apr 3 23:15:11 EDT 2008


Don't forget that with the V2 card you must explicitly specify channel  
speed to be 64K in order for bring up a T1. It's no longer  the  
default...


Joe McGuckin
ViaNet Communications

joe at via.net
650-207-0372 cell
650-213-1302 office
650-969-2124 fax



On Apr 3, 2008, at 3:55 PM, Ben Mason wrote:

> I'm not sure i'd say better all the time, i had a recent issue where i
> had a circuit work in v1 card but not on a V2 card the v2 have less of
> a tolerance for poor wiring and some smartjack configs.
>
> On Thu, Apr 3, 2008 at 6:10 PM, Justin Shore  
> <justin at justinshore.com> wrote:
>> Yeah, and I was thinking I had a v1 working in an ISR too but I  
>> can't find
>> one.  V2s are better anyway.
>>
>> Justin
>>
>>
>>
>> virendra rode // wrote:
>>
>>> -----BEGIN PGP SIGNED MESSAGE-----
>>> Hash: SHA1
>>>
>>> Justin Shore wrote:
>>>
>>>> I should have thought of that.  :-(
>>>>
>>>>
>> http://www.cisco.com/en/US/prod/collateral/routers/ps5854/prod_qas0900aecd80169bd6.html
>>>>
>>>>
>>>> Justin
>>>>
>>> - ---------------------------
>>> Bummer because I thought I read somewhere that someone was able to  
>>> force
>>> WIC-1DSU-T1 to function with 2811 under 124-11.XJ.bin. Maybe I  
>>> misread.
>>> I'm sure I don't have a counterfeit WIC.
>>>
>>>
>>>       WIC Slot 0:
>>>       FT1 BT8360
>>>       WIC module not supported/disabled in this slot
>>>       Hardware revision 1.3           Board revision E0
>>>       Serial number     28963342      Part number    800-03279-04
>>>       FRU Part Number     WIC-1DSU-T1=
>>>       Test history      0x0           RMA number     00-00-00
>>>       Connector type    Wan Module
>>>       EEPROM format version 2
>>>       EEPROM contents (hex):
>>>         0x20: 02 11 01 03 01 B9 F2 0E 50 0C CF 04 00 00 00 00
>>>         0x30: 70 00 00 00 02 08 25 01 FF FF FF FF FF FF FF FF
>>>
>>>
>>> regards,
>>> /virendra
>>>
>>>
>>>> Ben Mason wrote:
>>>>
>>>>> The WIC-1DSU-T1 is not supported in a 2811 you need to use a
>>>>> WIC-1DSU-T1-V2
>>>>>
>>>>
>>>>
>>> -----BEGIN PGP SIGNATURE-----
>>> Version: GnuPG v1.4.2.2 (GNU/Linux)
>>> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>>>
>>> iD8DBQFH9VQhpbZvCIJx1bcRAswlAJ9spygoboHg9gOY0QgT53M4yyx+IwCeIpKf
>>> 0I7zZFex8Unv10brhH9qaHQ=
>>> =BMcN
>>> -----END PGP SIGNATURE-----
>>>
>>
>
>
>
> -- 
> --
> Ben
> email: locutus at the-collective.net
> web: http://locutus.the-collective.net/
> irc: su1droot; aim: su1droot; y!: su1droot
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/



More information about the cisco-nsp mailing list