[c-nsp] changing from ospf to eigrp

[Jeff Cartier]

Can I run both at the same time?
- You can run both at the same time.

I would like to change our layer 3 switches from ospf to eirgrp.  Is
there a way I can accomplish this on a live system without causing
problems?
- If you talking about redistribution between IGPs, then technically yes.  Just be very careful not to create a routing loop.  A strategy on how to do this will all depend on the size of your network and the complexity of the migration.

May I inquire as to why your moving from OSPF to EIGRP?

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net on behalf of Dan Letkeman
Sent: Fri 4/4/2008 7:48 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] changing from ospf to eigrp
 
Hello,

I would like to change our layer 3 switches from ospf to eirgrp.  Is
there a way I can accomplish this on a live system without causing
problems?  Can I run both at the same time?

Thanks,
Dan.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/