[c-nsp] changing from ospf to eigrp

[Dan Armstrong]

We just went through years of pain and money to change from eigrp to 
ospf. :-)





Jeff Cartier wrote:
> Can I run both at the same time?
> - You can run both at the same time.
>
> I would like to change our layer 3 switches from ospf to eirgrp.  Is
> there a way I can accomplish this on a live system without causing
> problems?
> - If you talking about redistribution between IGPs, then technically yes.  Just be very careful not to create a routing loop.  A strategy on how to do this will all depend on the size of your network and the complexity of the migration.
>
> May I inquire as to why your moving from OSPF to EIGRP?
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net on behalf of Dan Letkeman
> Sent: Fri 4/4/2008 7:48 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] changing from ospf to eigrp
>  
> Hello,
>
> I would like to change our layer 3 switches from ospf to eirgrp.  Is
> there a way I can accomplish this on a live system without causing
> problems?  Can I run both at the same time?
>
> Thanks,
> Dan.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>