[c-nsp] HA: CBWFQ-LLQ on PPPoE Virtual Templates

[Andrey Kostin]

Hello,

Mentioned document states about applying service-policy command to
virtual-template interface:
"This features does not support the input keyword. Enter the output keyword
only."
However, later in the section "Configuring Per-Session QoS Using a RADIUS
Server" read:
cisco-avpair = "sub-qos-policy-in/out=p23"
Is it possible to do input policing via RADIUS or anyway else? Does anybody
tested this?

WBR,
Andrey

> -----???????? ?????????-----
> ??: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] ?? ????? Oliver 
> Boehmer (oboehmer)
> ??????????: 10 ?????? 2008 ?. 8:58
> ????: Gregory Boehnlein; cisco-nsp at puck.nether.net
> ????: Re: [c-nsp] CBWFQ-LLQ on PPPoE Virtual Templates
> 
> 
> QoS for L2TP users is not supported in your release, you need 12.2SB,
> take a look at the "Per-Session QoS" feature at
> http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbbbrs1b.html
> 
> 
> 	oli
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/