[c-nsp] HA: CBWFQ-LLQ on PPPoE Virtual Templates

[Tassos Chatzithomaoglou]

We're using both in/out policies without any problem on G1/G2 7200s. It all depends on the QoS actions inside the policy-map.

But i don't know if 12.2SB is officially supported for NPE300 based 7200s.

--
Tassos


Andrey Kostin wrote on 10/4/2008 5:11 μμ:
> Hello,
> 
> Mentioned document states about applying service-policy command to
> virtual-template interface:
> "This features does not support the input keyword. Enter the output keyword
> only."
> However, later in the section "Configuring Per-Session QoS Using a RADIUS
> Server" read:
> cisco-avpair = "sub-qos-policy-in/out=p23"
> Is it possible to do input policing via RADIUS or anyway else? Does anybody
> tested this?
> 
> WBR,
> Andrey
> 
>> -----???????? ?????????-----
>> ??: cisco-nsp-bounces at puck.nether.net 
>> [mailto:cisco-nsp-bounces at puck.nether.net] ?? ????? Oliver 
>> Boehmer (oboehmer)
>> ??????????: 10 ?????? 2008 ?. 8:58
>> ????: Gregory Boehnlein; cisco-nsp at puck.nether.net
>> ????: Re: [c-nsp] CBWFQ-LLQ on PPPoE Virtual Templates
>>
>>
>> QoS for L2TP users is not supported in your release, you need 12.2SB,
>> take a look at the "Per-Session QoS" feature at
>> http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbbbrs1b.html
>>
>>
>> 	oli
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>