[c-nsp] ASA Transparent Mode with VLAN Trunks

[Ge Moua]

Email me off-line, I have working configs for this.

Regards,
Ge Moua | Email: moua0100 at umn.edu

Network Design Engineer
University of Minnesota | Networking & Telecommunications Services

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Mike Louis
Sent: Wednesday, April 16, 2008 10:13 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] ASA Transparent Mode with VLAN Trunks

I am trying to configure an ASA in Transparent mode running 7.2(3) version
of code. It has trunk interfaces trunking vlans 100,101 on both the inside
and outside interfaces of the device. However the ASA will not let me assign
VLAN 100,101 to subinterfaces on both sides of the firewall. Does anyone
have a working configuration on how to accomplish this? I want to trunk 2
VLANs through a L2 firewall using the same VLAN tags on each inside/outside
sides of the firewall.

TIA

Mike

________________________________
Note: This message and any attachments is intended solely for the use of the
individual or entity to which it is addressed and may contain information
that is non-public, proprietary, legally privileged, confidential, and/or
exempt from disclosure. If you are not the intended recipient, you are
hereby notified that any use, dissemination, distribution, or copying of
this communication is strictly prohibited. If you have received this
communication in error, please notify the original sender immediately by
telephone or return email and destroy or delete this message along with any
attachments immediately.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/