[c-nsp] Cisco 7206VXR

Jason Berenson jason at pins.net
Fri Apr 18 15:12:53 EDT 2008


Rodney,

I'm just going to try 12.3.22 (which is what we have running on an 
NPE-350 with T3 and OC3 cards installed) to see if it's stable.  If not 
I'll try the other G1 I have sitting here.

-Jason

Rodney Dunn wrote:
> On Fri, Apr 18, 2008 at 02:57:42PM -0400, Jason Berenson wrote:
>   
>> Rodney,
>>
>> When I say pop in, I mean the router is booted and I put the card in.  
>> I've tried a hard reboot too, same results.  It did generate a 
>> crashinfo, once I get our contract renewed I can open a TAC case.
>>     
>
> Do you have another G1 you could try?
>
> The decode appears to be where we are trying to read some information from
> the system controller over the PCI bus. I haven't dug deep in that code
> but that's what I see from a quick glance of the trace decode.
>
>
>   
>> What do you mean by 12.4 will never be GD?
>>     
>
> Can't elaborate at this point. Sorry.
>
>
>   
>> -Jason
>>
>> Rodney Dunn wrote:
>>     
>>> Elaborate what "pop in" means?
>>>
>>> OIR?
>>> Hard reboot with it installed?
>>>
>>>
>>> Did it generate a crashinfo?
>>>
>>> A TAC SR needs to be opened because it's a bug.
>>>
>>> Rodney
>>>
>>> PS. 12.4 will never be GD. That program is retired.
>>>
>>>
>>> On Fri, Apr 18, 2008 at 02:09:05PM -0400, Jason Berenson wrote:
>>>  
>>>       
>>>> Greetings,
>>>>
>>>> I'm going to be upgrading a couple of 7206VXR NPE-350's to G1's tomorrow 
>>>> night.  I'm testing right now with the latest IP plus software: 
>>>> c7200-is-mz.124-19.bin.  When I pop in a PA-MC-T3 the router promptly 
>>>> crashes:
>>>>
>>>> Router#
>>>> *Oct  8 10:44:54.339: %OIR-6-INSCARD: Card inserted in slot 1, 
>>>> interfaces admini
>>>> stratively shut down
>>>>
>>>> 10:44:58 UTC Fri Oct 8 2004: Data Bus Error exception, CPU signal 10, 
>>>> PC = 0x60
>>>> 98AAA0
>>>>
>>>> --------------------------------------------------------------------
>>>>   Possible software fault. Upon reccurence,  please collect
>>>>   crashinfo, "show tech" and contact Cisco Technical Support.
>>>> --------------------------------------------------------------------
>>>>
>>>> -Traceback= 0x6098AAA0 0x6097F064 0x6097F5B4 0x6097E664 0x60996DB8 
>>>> 0x6084DF60 0x
>>>> 6084DF44
>>>>
>>>>
>>>> Should I be running a different version of 12.4 or maybe just stick with 
>>>> 12.3 until 12.4 is GD?
>>>>
>>>> Thanks,
>>>> Jason
>>>> _______________________________________________
>>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>>>    
>>>>         


More information about the cisco-nsp mailing list