[c-nsp] Cisco 7206VXR

[Rodney Dunn]

Gary reminded me it was already on CCO:

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps8802/ps6968/ps6350/product_bulletin_cisco_ios_software_gd_program_retirement.html


On Fri, Apr 18, 2008 at 03:12:53PM -0400, Jason Berenson wrote:
> Rodney,
> 
> I'm just going to try 12.3.22 (which is what we have running on an 
> NPE-350 with T3 and OC3 cards installed) to see if it's stable.  If not 
> I'll try the other G1 I have sitting here.
> 
> -Jason
> 
> Rodney Dunn wrote:
> >On Fri, Apr 18, 2008 at 02:57:42PM -0400, Jason Berenson wrote:
> >  
> >>Rodney,
> >>
> >>When I say pop in, I mean the router is booted and I put the card in.  
> >>I've tried a hard reboot too, same results.  It did generate a 
> >>crashinfo, once I get our contract renewed I can open a TAC case.
> >>    
> >
> >Do you have another G1 you could try?
> >
> >The decode appears to be where we are trying to read some information from
> >the system controller over the PCI bus. I haven't dug deep in that code
> >but that's what I see from a quick glance of the trace decode.
> >
> >
> >  
> >>What do you mean by 12.4 will never be GD?
> >>    
> >
> >Can't elaborate at this point. Sorry.
> >
> >
> >  
> >>-Jason
> >>
> >>Rodney Dunn wrote:
> >>    
> >>>Elaborate what "pop in" means?
> >>>
> >>>OIR?
> >>>Hard reboot with it installed?
> >>>
> >>>
> >>>Did it generate a crashinfo?
> >>>
> >>>A TAC SR needs to be opened because it's a bug.
> >>>
> >>>Rodney
> >>>
> >>>PS. 12.4 will never be GD. That program is retired.
> >>>
> >>>
> >>>On Fri, Apr 18, 2008 at 02:09:05PM -0400, Jason Berenson wrote:
> >>> 
> >>>      
> >>>>Greetings,
> >>>>
> >>>>I'm going to be upgrading a couple of 7206VXR NPE-350's to G1's 
> >>>>tomorrow night.  I'm testing right now with the latest IP plus 
> >>>>software: c7200-is-mz.124-19.bin.  When I pop in a PA-MC-T3 the router 
> >>>>promptly crashes:
> >>>>
> >>>>Router#
> >>>>*Oct  8 10:44:54.339: %OIR-6-INSCARD: Card inserted in slot 1, 
> >>>>interfaces admini
> >>>>stratively shut down
> >>>>
> >>>>10:44:58 UTC Fri Oct 8 2004: Data Bus Error exception, CPU signal 10, 
> >>>>PC = 0x60
> >>>>98AAA0
> >>>>
> >>>>--------------------------------------------------------------------
> >>>>  Possible software fault. Upon reccurence,  please collect
> >>>>  crashinfo, "show tech" and contact Cisco Technical Support.
> >>>>--------------------------------------------------------------------
> >>>>
> >>>>-Traceback= 0x6098AAA0 0x6097F064 0x6097F5B4 0x6097E664 0x60996DB8 
> >>>>0x6084DF60 0x
> >>>>6084DF44
> >>>>
> >>>>
> >>>>Should I be running a different version of 12.4 or maybe just stick 
> >>>>with 12.3 until 12.4 is GD?
> >>>>
> >>>>Thanks,
> >>>>Jason
> >>>>_______________________________________________
> >>>>cisco-nsp mailing list  cisco-nsp at puck.nether.net
> >>>>https://puck.nether.net/mailman/listinfo/cisco-nsp
> >>>>archive at http://puck.nether.net/pipermail/cisco-nsp/
> >>>>   
> >>>>