[c-nsp] Configuration buffer on 7206

[Nick Voth]

Hello folks,

I just started running in to this error when doing a "copy run start"
command on my 7206VXR:

==============
copy run start
Destination filename [startup-config]?
Building configuration...

% Warning: Saving this config to nvram may corrupt any network management or
security files stored at the end of nvram.
Continue? [no]: no
% Configuration buffer full, can't add command: ntp clock-period 17179886
%Aborting Save. Compress the config, Save it to flash or Free up space on
device[OK]
==============

I've saved my running config to disk0 and to an off site FTP server, but I'm
stumped about how to get the running config to be saved to the
"startup-config" in nvram...

Our config is pretty large because we have over 1000 VCI's configured on an
ATM DS3 card.

Any help would be wonderful!

Thanks,

-Nick Voth