[c-nsp] Configuration buffer on 7206

[Jared Mauch]

conf t
service compress-config
end
wr

	- Jared

On Mon, Apr 28, 2008 at 02:39:28PM -0600, Nick Voth wrote:
> Hello folks,
> 
> I just started running in to this error when doing a "copy run start"
> command on my 7206VXR:
> 
> ==============
> copy run start
> Destination filename [startup-config]?
> Building configuration...
> 
> % Warning: Saving this config to nvram may corrupt any network management or
> security files stored at the end of nvram.
> Continue? [no]: no
> % Configuration buffer full, can't add command: ntp clock-period 17179886
> %Aborting Save. Compress the config, Save it to flash or Free up space on
> device[OK]
> ==============
> 
> I've saved my running config to disk0 and to an off site FTP server, but I'm
> stumped about how to get the running config to be saved to the
> "startup-config" in nvram...
> 
> Our config is pretty large because we have over 1000 VCI's configured on an
> ATM DS3 card.
> 
> Any help would be wonderful!
> 
> Thanks,
> 
> -Nick Voth
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.