[c-nsp] Configuration buffer on 7206

[Nick Voth]

Thanks Jared. I discovered that right after I sent the message. It
definitely works.

I may have to find a way to load the config from flash instead of nvram in
the future, but compressing it seems to have worked in the sort term.

Thanks very much,

-Nick Voth


> From: Jared Mauch <jared at puck.nether.net>
> Date: Mon, 28 Apr 2008 16:48:50 -0400
> To: Nick Voth <nvoth at estreet.com>
> Cc: <cisco-nsp at puck.nether.net>
> Subject: Re: [c-nsp] Configuration buffer on 7206
> 
> conf t
> service compress-config
> end
> wr
> 
> - Jared
> 
> On Mon, Apr 28, 2008 at 02:39:28PM -0600, Nick Voth wrote:
>> Hello folks,
>> 
>> I just started running in to this error when doing a "copy run start"
>> command on my 7206VXR:
>> 
>> ==============
>> copy run start
>> Destination filename [startup-config]?
>> Building configuration...
>> 
>> % Warning: Saving this config to nvram may corrupt any network management or
>> security files stored at the end of nvram.
>> Continue? [no]: no
>> % Configuration buffer full, can't add command: ntp clock-period 17179886
>> %Aborting Save. Compress the config, Save it to flash or Free up space on
>> device[OK]
>> ==============
>> 
>> I've saved my running config to disk0 and to an off site FTP server, but I'm
>> stumped about how to get the running config to be saved to the
>> "startup-config" in nvram...
>> 
>> Our config is pretty large because we have over 1000 VCI's configured on an
>> ATM DS3 card.
>> 
>> Any help would be wonderful!
>> 
>> Thanks,
>> 
>> -Nick Voth
>> 
>> 
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> -- 
> Jared Mauch  | pgp key available via finger from jared at puck.nether.net
> clue++;      | http://puck.nether.net/~jared/  My statements are only mine.