[c-nsp] which IOS supports sup720 + FlexWAN + PA-POS-OC3?

[Hank Nussbacher]

On Tue, 26 Aug 2008, Marco d'Itri wrote:

Works for me on 12.2(18)SXE6b but all are eFlexwans:

Slot 4: Logical_index 9
         2 port adapter Enhanced FlexWAN controller
         Board is analyzed ipc ready
         HW rev 0.1, board revision A01
         Serial Number:  Part number: 73-6348-01

         Slot database information:
         Flags: 0x2004   Insertion time: 0x22C08 (6w5d ago)

         Controller Memory Size:
                 192 MBytes CPU Memory
                 63 MBytes Packet Memory
                 255 MBytes Total on Board SDRAM
         IOS (tm) cwlc Software (cwpa2-DW-M), Version 12.2(18)SXE6b, 
RELEASE SOFTWARE (fc2)

         PA Bay 1 Information:
                 POS PA, 2 port, PA-POS-2OC3
                 EEPROM format version 4
                 HW rev 1.00, Board revision A0
                 Serial number: JAE09044GVG  Part number: 73-8220-05

-Hank

> When I plug in the PA I get this:
>
> SLOT 5/0: 00:00:03: %PA-2-UNDEFIO: Unsupported I/O Controller (type 65535) in I/O Bay. The I/O Controller network interfaces will be unavailable.
>
> a normal fast ethernet PA works fine.
> cisco.com says that the PA is supported even by non-enhanced FlexWANs.
>
> IOS (tm) s72033_rp Software (s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(18)SXF13, RELEASE SOFTWARE (fc1)
>
> -- 
> ciao,
> Marco
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>