[c-nsp] which IOS supports sup720 + FlexWAN + PA-POS-OC3?

[Ian Cox]

PA-POS-OC3 has been supported in both FlexWANs since they FCS'd. Maybe
that particular PA has the idprom messed up. Try doing a sh diagbus with
it inserted and see what the PA idprom is telling the system.

bourke#sh diagbus
...
Slot 8: Logical_index 16
        2 port adapter Enhanced FlexWAN controller
        Board is analyzed ipc ready
        HW rev 1.5, board revision A0
        Serial Number: JABxxxxxx Part number: 73-8273-09

        Slot database information:
        Flags: 0x2004   Insertion time: 0x2CE0C (00:00:11 ago)

        CWAN Controller Memory Size: Unknown


        PA Bay 0 Information:
                2CT3+ single wide PA, 2 ports
                EEPROM format version 1
                HW rev 1.00, Board revision A0
                Serial number: xxxxxxxx  Part number: 73-3388-03


Ian

Marco d'Itri wrote:
> When I plug in the PA I get this:
> 
> SLOT 5/0: 00:00:03: %PA-2-UNDEFIO: Unsupported I/O Controller (type 65535) in I/O Bay. The I/O Controller network interfaces will be unavailable. 
> 
> a normal fast ethernet PA works fine.
> cisco.com says that the PA is supported even by non-enhanced FlexWANs.
> 
> IOS (tm) s72033_rp Software (s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(18)SXF13, RELEASE SOFTWARE (fc1)
>