[c-nsp] which IOS supports sup720 + FlexWAN + PA-POS-OC3?

[Marco d'Itri]

On Aug 26, Ian Cox <icox at cisco.com> wrote:

> PA-POS-OC3 has been supported in both FlexWANs since they FCS'd. Maybe
> that particular PA has the idprom messed up. Try doing a sh diagbus with
> it inserted and see what the PA idprom is telling the system.

This is the output for card back in the 7200 where it has been in use so
far:

picard.mil#show diag 3
Slot 3: 
        POS Single Width, Single Mode Port adapter, 1 port
        Port adapter is analyzed
        Port adapter insertion time 13:18:33 ago
        EEPROM contents at hardware discovery:
        Hardware revision 2.0           Board revision A0
        Serial number     1xxxxxx6      Part number    73-3193-02
        FRU Part Number:  PA-POS-OC3SMI=

        Test history      0x0           RMA number     00-00-00
        EEPROM format version 1
        EEPROM contents (hex):
          0x20: 01 95 02 00 00 E8 71 06 49 0C 79 02 00 00 00 00
          0x30: 50 00 00 00 99 08 27 00 00 00 FF FF FF FF FF FF


> Marco d'Itri wrote:
> > When I plug in the PA I get this:
> > 
> > SLOT 5/0: 00:00:03: %PA-2-UNDEFIO: Unsupported I/O Controller (type 65535) in I/O Bay. The I/O Controller network interfaces will be unavailable. 
> > 
> > a normal fast ethernet PA works fine.
> > cisco.com says that the PA is supported even by non-enhanced FlexWANs.
> > 
> > IOS (tm) s72033_rp Software (s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(18)SXF13, RELEASE SOFTWARE (fc1)
> > 

-- 
ciao,
Marco