[c-nsp] 6506 unusual behavior

[Arie Vayner (avayner)]

Adam,

I think you have a bit too many routes on this box...

Take a look at
http://www.cisco.com/en/US/docs/ios/ipswitch/command/reference/isw_i1.ht
ml#wp1014315
The thing is that mls cef maximum-routes is not supported on Sup2...

Can you please share the outputs of:

- show ip route summary
- show mls cef summary
- show mls cef maximum-routes

Arie
 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Adam Korab
Sent: Wednesday, August 27, 2008 17:58 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] 6506 unusual behavior

Hi, I could use some advice here.  6506 with single WS-X6K-SUP2-2GE.

Just changed IOS from 122(18)SXF14. to 12.2(18)SXF14 to get around a
nasty bug that presented as hanging things like "sh run" and "dir
disk0"...as well as passing traffic out the wrong interface.

Now there's what appears to be an ssh debug message upon every CLI
logout:

edge1#exit
channel_by_id: 0: bad id: channel free
client_input_channel_req: channel 0: unknown channel Connection to
edge1.xxx.xxx closed.

And secondly, on the same box, can somebody point me in the right
direction regarding this?

5d04h: %MLSCEF-SP-7-FIB_EXCEPTION: FIB TCAM exception for IPv4 unicast,
Some routes will be software switched.
Use "mls cef maximum-routes" to modify FIB TCAM  partition.

Thanks!

--Adam
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/