[c-nsp] SRB4 (was RE: SRC2?)

[Liviu Pislaru]

hi,

i'm running SRB4 on WS-SUP720-3BXL & WS-F6700-DFC3CXL linecards.

i was running SRB2, hit some BUGs and had to option:

1. upgrade to SRB4
2. downgrade to SRA7 (change DFC3CXL linecards)

i went for option 1. and everything is working fine now except my logs
are full of these lines:

Aug 29 09:45:59 EETDST: %DIAG-SP-3-TEST_SKIPPED: Module 7:
TestFabricFlowControlStatus{ID=33} is skipped

Aug 29 09:46:01 EETDST: %DIAG-SP-3-TEST_SKIPPED: Module 7:
TestFabricFlowControlStatus{ID=33} is skipped


[...]

  7    2  Supervisor Engine 720 (Hot)            WS-SUP720-3BXL
SAL09412THT
  8    2  Supervisor Engine 720 (Active)         WS-SUP720-3BXL
SAL09368YPZ
[...]



i'm not worried (yet) because cisco says:

=====================================================================

%DIAG-3-TEST_SKIPPED (x1): [chars]: [chars]{ID=[dec]} is skipped

Explanation: The specified diagnostic test cannot be run.

Recommended Action: None. Although the test cannot be run, this message
does
not indicate a  problem.

=====================================================================

or

=====================================================================

%DIAG-3-TEST_SKIPPED (x0): [chars]: [chars]{ID=[dec]} is skipped

Explanation: This message indicates that the diagnostic test cannot be
run.

Recommended Action: No action is required. The system is working
properly.

=====================================================================

but i had to filter these lines from my logs.

i'm running BGP (full bgp table), MPLS, OSPF, MULTICAST on this router.
so i'm pretty pleased with SRB4 until now.

--
liviu.

On Wed, 2008-08-13 at 14:58 +0200, Tomas Daniska wrote:
> speaking of the releases... is anyone running SRB4 in production yet?
> 
> cheers
> 
> --
> 
> deejay
> 
> 
> > -----Original Message-----
> > From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> > bounces at puck.nether.net] On Behalf Of Mark Tinka
> > Sent: 13 August 2008 14:04
> > To: cisco-nsp at puck.nether.net
> > Subject: Re: [c-nsp] SRC2?
> > 
> > On Tuesday 12 August 2008 23:32:42 Chris Griffin wrote:
> > 
> > > Anyone know when 12.2(33)SRC2 is supposed to be released,
> > > specifically for the 7600.  I had heard by the end of
> > > July, but so far no release.
> > 
> > Same here... heard it was meant to be mid-July, but nothing
> > yet.
> > 
> > Having waited this long, it'll come when it comes, I
> > guess :-).
> > 
> > Cheers,
> > 
> > Mark.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/