[c-nsp] DS3 mux issues
Larry Smith
lesmith at ecsis.net
Tue Dec 9 17:58:29 EST 2008
On Tue December 9 2008 15:28, Justin Shore wrote:
> We're staging a DS3 mux to aggregate T1s back to a PA-MC-2T3-EC in a
> 7206VXR (G2) running 12.4(15)T7. I haven't channelized a T3 before so
> I'm feeling my way through this. It looks to be relatively simple but
> I'm getting tripped up somewhere. On the 7206:
>
> controller T3 1/0
> cablelength 10
> logging-events detail
> t1 1 channel-group 0 timeslots 1-24
> t1 2 channel-group 0 timeslots 1-24
> t1 3 channel-group 0 timeslots 1-24
> t1 4 channel-group 0 timeslots 1-24
> t1 5 channel-group 0 timeslots 1-24
> t1 6 channel-group 0 timeslots 1-24
> t1 7 channel-group 0 timeslots 1-24
> t1 8 channel-group 0 timeslots 1-24
> t1 9 channel-group 0 timeslots 1-24
> t1 10 channel-group 0 timeslots 1-24
> t1 11 channel-group 0 timeslots 1-24
> t1 12 channel-group 0 timeslots 1-24
> t1 13 channel-group 0 timeslots 1-24
> t1 14 channel-group 0 timeslots 1-24
> t1 15 channel-group 0 timeslots 1-24
> t1 16 channel-group 0 timeslots 1-24
> t1 17 channel-group 0 timeslots 1-24
> t1 18 channel-group 0 timeslots 1-24
> t1 19 channel-group 0 timeslots 1-24
> t1 20 channel-group 0 timeslots 1-24
> t1 21 channel-group 0 timeslots 1-24
> t1 22 channel-group 0 timeslots 1-24
> t1 23 channel-group 0 timeslots 1-24
> t1 24 channel-group 0 timeslots 1-24
> t1 25 channel-group 0 timeslots 1-24
> t1 26 channel-group 0 timeslots 1-24
> t1 27 channel-group 0 timeslots 1-24
> t1 28 channel-group 0 timeslots 1-24
>
<cut>
Here is an excerpt of one I have up and running: (much cut for obvious
reasons)
controller T3 5/0
framing m23
clock source line
cablelength 10
t1 1 channel-group 0 timeslots 1-24
t1 2 channel-group 1 timeslots 1-24
t1 3 channel-group 2 timeslots 1-12
t1 4 channel-group 3 timeslots 1-24
t1 5 channel-group 4 timeslots 1-12
t1 6 channel-group 5 timeslots 1-24
t1 7 channel-group 6 timeslots 1-24
t1 8 channel-group 7 timeslots 1-12
t1 9 channel-group 8 timeslots 1-12
t1 10 channel-group 9 timeslots 1-12
.....
t1 1 clock source Line
t1 2 clock source Line
t1 3 clock source Line
t1 4 clock source Line
t1 6 clock source Line
t1 7 clock source Line
t1 8 clock source Line
t1 9 clock source Line
t1 10 clock source Line
...cut other bits.....
!
interface Serial5/0/1:0
description XXXXXXXXXXXXXXXX
bandwidth 1544
ip address 1.2.3.4 0.0.0.0 (bogus)
encapsulation ppp
down-when-looped
fair-queue
!
interface Serial5/0/2:1
description YYYYYYYYYYYYYYYYYYY
bandwidth 1544
ip address 2.3.4.5 0.0.0.0 (bogus)
encapsulation ppp
down-when-looped
fair-queue
!
On your virtual, what does it show:
sh int s5/0/2:1
Serial5/0/2:1 is up, line protocol is up
Hardware is PA-MC-T3
Description: YYYYYYYYYYYYYYYYYYYYYYY
Internet address is 2.3.4.5/30
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 169/255, rxload 3/255
Encapsulation PPP, LCP Open
Open: IPCP, crc 16, loopback not set
Last input 1d03h, output 00:00:00, output hang never
Last clearing of "show interface" counters 00:00:02
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 2/1000/64/0 (size/max total/threshold/drops)
Conversations 1/231/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 1158 kilobits/sec
5 minute input rate 20000 bits/sec, 56 packets/sec
5 minute output rate 1025000 bits/sec, 91 packets/sec
133 packets input, 5876 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
260 packets output, 391040 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions no alarm present
Timeslot(s) Used: 1-24, subrate: 1536Kb/s, transmit delay is 0 flags
non-inverted data
--
Larry Smith
SysAd ECSIS.NET
sysad at ecsis.net
--
Larry Smith
lesmith at ecsis.net
More information about the cisco-nsp
mailing list