[c-nsp] Utilization of a line card (7606)

[Roddy Strachan]

Hey guys,

 

Hoping someone can help.

 

Is there any command to check the utilisation of a specific card within
a 7606?

 

Or lets be more specific, I suspect a line card in the router is
overloaded and causing the CPU to spike, is there any way to find out
how much utilisation that card is using to check to see if we are over
subscribing it or not ?

 

The card model in question is a WS-X6148A-GE-TX which I believe has no
dedicated packet processor like a SIP-400/SPA so therefore it punts
everything to the CPU.

 

 

Thanks

 


This email and any files transmitted with it are confidential and intended
 solely for the use of the individual or entity to whom they are addressed. 
Please notify the sender immediately by email if you have received this 
email by mistake and delete this email from your system. Please note that
 any views or opinions presented in this email are solely those of the
 author and do not necessarily represent those of the organisation. 
Finally, the recipient should check this email and any attachments for 
the presence of viruses. The organisation accepts no liability for any 
damage caused by any virus transmitted by this email.