[c-nsp] SXH4 Applying VLAN changes may take few minutes

[David Granzer]

Hello,

did anybody see output below with SXH4 ? Why applying vlan can take a
few minutes ?

6503-lab-1#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
6503-lab-1(config)#vlan 123
6503-lab-1(config-vlan)#end
% Applying VLAN changes may take few minutes.  Please wait..

In lab enviroment with a few vlans configured applying vlan takes less
than one second (like before with SXH and SXF).

Thanks,
David