[c-nsp] SXH4 Applying VLAN changes may take few minutes

Gert Doering gert at greenie.muc.de
Wed Dec 10 04:46:14 EST 2008


On Wed, Dec 10, 2008 at 10:36:44AM +0100, David Granzer wrote:
> did anybody see output below with SXH4 ? Why applying vlan can take a
> few minutes ?
> 6503-lab-1#conf t
> Enter configuration commands, one per line.  End with CNTL/Z.
> 6503-lab-1(config)#vlan 123
> 6503-lab-1(config-vlan)#end
> % Applying VLAN changes may take few minutes.  Please wait..

Same message here, with SXH3a and SXI.  But it never took any sort of
"noticeable" time.

I'd guess that this might be different in a VTP environment with "lots of"
devices.  We don't use VTP (anmore), though, so I wouldn't know.

USENET is *not* the non-clickable part of WWW!
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 304 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20081210/37640518/attachment.bin>

More information about the cisco-nsp mailing list