[c-nsp] SXH4 Applying VLAN changes may take few minutes

[David Sinn]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hey,

On Dec 10, 2008, at 1:46 AM, Gert Doering wrote:

> Hi,
>
> On Wed, Dec 10, 2008 at 10:36:44AM +0100, David Granzer wrote:
>> did anybody see output below with SXH4 ? Why applying vlan can take a
>> few minutes ?
>>
>> 6503-lab-1#conf t
>> Enter configuration commands, one per line.  End with CNTL/Z.
>> 6503-lab-1(config)#vlan 123
>> 6503-lab-1(config-vlan)#end
>> % Applying VLAN changes may take few minutes.  Please wait..
>
> Same message here, with SXH3a and SXI.  But it never took any sort of
> "noticeable" time.

This is likely related to the intro of VSS, which does take forever to  
sync the VLAN DB and was intro'ed in SXH.

David

> I'd guess that this might be different in a VTP environment with  
> "lots of"
> devices.  We don't use VTP (anmore), though, so I wouldn't know.
>
> gert
> -- 
> USENET is *not* the non-clickable part of WWW!
>                                                           //www.muc.de/~gert/
> Gert Doering - Munich, Germany                             gert at greenie.muc.de
> fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (Darwin)

iEYEARECAAYFAkk/+78ACgkQLa9jIE3ZamMdXwCgugwKeZLgw9wJ3vcwyJSMyodi
dsQAn37UVrQDlLbIipBNfIqRxtpUwzr8
=8NnN
-----END PGP SIGNATURE-----