[c-nsp] SXH4 Applying VLAN changes may take few minutes

Church, Charles cchurc05 at harris.com
Wed Dec 10 09:50:43 EST 2008


Which VTP version?  V3 has more 'checks' in it, might explain it.  I've
never seen that with V1/V2. 

Chuck

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of David Granzer
Sent: Wednesday, December 10, 2008 4:37 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] SXH4 Applying VLAN changes may take few minutes


Hello,

did anybody see output below with SXH4 ? Why applying vlan can take a
few minutes ?

6503-lab-1#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
6503-lab-1(config)#vlan 123
6503-lab-1(config-vlan)#end
% Applying VLAN changes may take few minutes.  Please wait..

In lab enviroment with a few vlans configured applying vlan takes less
than one second (like before with SXH and SXF).

Thanks,
David
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list