[c-nsp] SXH4 Applying VLAN changes may take few minutes

[David Granzer]

6503-lab-1#sh vtp status | i Version|VTP Ope
VTP Version                     : 2
VTP Operating Mode              : Transparen

David

On Wed, Dec 10, 2008 at 3:50 PM, Church, Charles <cchurc05 at harris.com> wrote:
> Which VTP version?  V3 has more 'checks' in it, might explain it.  I've
> never seen that with V1/V2.
>
> Chuck
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of David Granzer
> Sent: Wednesday, December 10, 2008 4:37 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] SXH4 Applying VLAN changes may take few minutes
>
>
> Hello,
>
> did anybody see output below with SXH4 ? Why applying vlan can take a
> few minutes ?
>
> 6503-lab-1#conf t
> Enter configuration commands, one per line.  End with CNTL/Z.
> 6503-lab-1(config)#vlan 123
> 6503-lab-1(config-vlan)#end
> % Applying VLAN changes may take few minutes.  Please wait..
>
> In lab enviroment with a few vlans configured applying vlan takes less
> than one second (like before with SXH and SXF).
>
> Thanks,
> David
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>