[c-nsp] elam packet capture

[Arie Vayner (avayner)]

Thilak,


Try running this command:

Router-sp#test mcast ltl index ef
index 0xEF contain ports 4/48

(in your case change ef with 2e)

Arie

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Thilak T
Sent: Wednesday, December 24, 2008 10:06
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] elam packet capture

Hello

Can anyone please guide me to understand how to find out physical
interface
to DEST_INDEX mapping. I did a elam capture to trave a IP packet going
to a
CSS VIP.

RBUS data:
SEQ_NUM                          [5] = 0x17
CCC                              [3] = b100 [L3_RW]
CAP1                             [1] = 0
CAP2                             [1] = 0
QOS                              [3] = 0
EGRESS                           [1] = 0
DT                               [1] = 0 [IP]
TL                               [1] = 0 [B32]
FLOOD                            [1] = 0
*DEST_INDEX                       [19] = 0x2E*
VLAN                             [12] = 250
RBH                              [3] = b010
RDT                              [1] = 0
GENERIC                          [1] = 0
EXTRA_CICLE                      [1] = 0
FABRIC_PRIO                      [1] = 0
L2                               [1] = 0
FCS1                             [8] = 0x1
IP_TOS_VALID                     [1] = 1
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/